Product Description
 |
 |
 |
 |
Key Features
• Remote control of up to 112 BRC cameras via IP
• Control up to 7 BRC cameras over a traditional VISCA
• Up to 5 controllers can operate on a single network
Control of up to 112 BRC cameras via an IP network
The RM-IP10 remote control panel gives you control of up to 112 BRC cameras over an IP network, or 7 cameras over a traditional VISCA-controlled network. Up to 5 remote control panels can share control of the system.
Easy to install control for BRC-H900, BRC-Z330 and BRC-Z700 cameras
The RM-IP10 is compatible with Sony's BRC-X400*1, SRG-X400*1, SRG-X120*1, BRC-X401*1,*2, SRG-201M2*1,*2, SRG-HD1M2*1,*2, BRC-H900, BRC-H800, BRC-X1000, SRG-300SE, SRG-300H, SRG-120DU, SRG-120DH and SRG-120DS camera models.
Control with BRC-H900 and older BRC-Z330 camera models requires installation of camera option board BRBK-IP10, and the BRC-Z700 camera is controlled when it is fitted with the BRBK-IP7Z option board. Easy and economical installation and set-up saves you time and cost.
*1 Requires firmware V2.17
*2 Model sold in China only
|
|
Specifications
Input/output connectors
- Control input/output
- VISCA RS-232C OUT Connector : Mini DIN 8pin type
- VISCA RS-422 connector: 9-pin type LAN : RJ-45, 10BASE-T/100BASE-TX automatically detected
- Tally In/Contact Out: 9-pin type
- Control signal format
- 9,600 bps/38,400 bps (for RS-232C/RS-422 communication)
- VISCA over IP communication
- Power Connector: JEITA type 4 (DC IN 12V)
General
- Input voltage: 12V DC (10.8 to 13.2V DC)
- Current consumption: 0.3A max. (at 12V DC), 3.6W
- Operating temperature: 0℃ to 40 ℃ (32°F to 104°F )
- Storage temperature: -20℃ to 60 ℃ (-4°F to 140°F )
- Dimensions (W x H x D): 391.3 x 165 x 145.9 mm (15 ½ inches x 6 ½ inches x 5 ¾ inches)
- Mass: Approx. 950g (2 lb 15 oz)
User Interface
- Display: No
- Speed Control: No
- Zoom Seesaw Lever: No
- Zoom Ring of Joystick: Yes
- Zoom Control selectable: Ring of Joystick
- ASSIGN button: 0
- Kensington lock hole: No
Camera Control
- Maximum IP Connections: 112
- Maximum Serial Connections: 7
- Control Protocol: VISCA over IP/VISCA RS-422/VISCA RS-232C switchable
- max Controller qty (/sys): 5
Direct Function of Buttons/Knobs
- Exposure mode selection: No
- One-push white balance auto adjustment: No
- One-push black balance auto adjustment: No
- Toggle color bars output on/off: No
- Toggle backlight compensation on/off: Yes
- Toggle flicker compensation on/off: No
- Display the status of iris, gain, shutter speed and zoom position: No
- R gain and B gain adjustment: Yes *1
- R black and B black adjustment: Yes *1
- Master black adjustment: No
- Detail level display: No
- Detail level adjustment: No
- Knee point display: No
- Knee point adjustment: No
- AE level display: No
- AE level adjustment: No
- Iris setting display: No
- Iris value adjustment: Yes *1
- Gain setting display: No
- Gain value adjustment: Yes *1
- Shutter speed display: No
- Shutter speed adjustment: Yes *1
Note: *1
- Need multiple button/knob/DIP SW operation
- Available functions/specifications depend on camera specification
What's In The Box
- (1) IP remote control panel
- (1) Operating Instructions
- (1) AC Power Adapter (SONY)
- (1) AC power cord
- (1) CD-ROM
- (2) RS-422 connector plug (attached to the unit)
