ST CinemaSnap Fixed Frame Rear Projection Screens with Black Powdercoat Finish

Product Description

 

CinemaSnap Rear Projection

The CinemaSnap fixed frame screen system can be utilised with rear projection material to allow for projector placement behind the screen, for use in a high light environment and where a trainer / presenter can move in front of the screen without blocking the light beam. It also removes the projector from the working area and provides a better contrast ratio.

It is our recommendation that a minimum lens throw ratio of 1.3:1 is used for this type of surface and it is definitely not suitable for short throw projectors. As a rule the higher the lens throw ratio & the longer the throw distance the better the resulting image. 

Features

• Description: Fixed Frame Screen -  ready to assemble - best possible lay-flat qualities
• Frame: Black Powdercoat Finish for Increased Contrast and Overscan Protection.
• Surface: Easy snap on screen surface RearFlex Grey, Refer to Screen Surface Options for additional surfaces.
• Borders: As per frame system - 80mm wide
• Brackets:MultiTech Wall Brackets
• Sizes: 72” Diagonal up to 425” Diagonal Custom Sizes & Formats available upon request.
• Options: Flocke Frame Optional

Note:

• Comes standard with a Black Powdercoat Frame
• Custom Sizes & Formats available upon request.
• It is our recommendation that a minimum lens throw ratio of 1.3:1 is used for this type of surface and it is definitely not suitable for short throw projectors. As a rule the higher the lens throw ratio & the longer the throw distance the better the resulting image. 
• The CinemaSnap frame system utilises the structure of the wall to provide frame rigidly. If you intend to not use the wall but some other method of mounting please contact the sales office for advice on any engineering alterations that may be required.