Product Description
 |
 |
 |
 |
Key Features
• Suits most 47"- 90" LCD screens up to 113kg Max weight
• LokTight™ rotating lockable tabs for security measures
• Post-install leveling screws for last minute adjustments
• Solid steel construction, black powder coated
• Extra low profile (6.7cm), Forward & horizontal tilt adjustment
• VESA mount patterns 1000 x 700mm Max
Strong™ X-Large Low Profile Tilt Mount for Flat-Panel TV's
As TVs get thinner and lighter, maximum holding capacities decrease as a result. The Strong™ Tilt Mount for Flat Panel TVs has a slightly reduced weight rating, with the ultimate goal of going slimmer. But rest assured, we did not compromise on build quality. Pick one of these thin TV mounts up to feel the 2.5mm thick steel used to make them, and notice the post-installation leveling screws, built-on lockable tabs, and easy-to-use wall plate to help make your custom AV job that much easier.
| Important Note: Currently Strong™ X-Large tilt and fixed mounts include mounting bracket bolts in sizes up to M8 (8mm). Some 65"+ HDTVs require M10 mounting bracket bolts. Please check your HDTV's mounting holes prior to installation. |
Solid Construction
Underneath its beautiful black powder coat, the SM-T mount is 2.5mm (XL is 3mm) of solid steel. Flat panels are getting thinner and thinner, and so should mounts holding them.
Slimmed Down
With TV's getting ultra slim, it was time to trim some weight off our mounts. Our SM-T mounts are only 2-¼" (XL is 2.63") deep for a low profile tilt mount.
Post Install Leveling
Leveling a mount is fairly straightforward and rather simple – except when you face an unlevel mantle or just slightly sloped ceiling. We understand the pain of having to re-level an installed mount, so our SM-T mounts include post-install leveling screws for last minute adjustments.
LokTight™ Tabs
Our Strong™ fixed and tilt mounts now include LokTight™ rotating lockable tabs directly on the arms themselves. The lockable tabs keep the arms against the mount, eliminate easy lifting from curious kids, and allow for a locking device to be added for security measures.
Friendly Wall-Plate
The center bolt hole location includes a notch so you can drill in a sheetrock screw for temporary hanging. Plus, it's reversible so there is no set top or bottom, which means no confusion. And, the wide mouth in the center allows for easy placement over a large Midi plate.
Specifications
| VESA Compliant: | 200x300, 300x200, 300x300, 400 x 200, 400x300, 400x400, 500x400, 500x500, 600x400, 600x500, 600x600, 700x500, 700x600, 700x700, 800x500, 800x600, 800x700, 900x700, 1000x700 |
| Min / Max TV: | 47" - 90" |
| Max TV Weight: | 113kg (250 lbs.) |
| Tilt Range: | 9° Forward / 9° Back |
| Construction: | 3mm Steel, Powder Coated Black |
| Depth: | 6.68cm (2.63") Profile |
| Hardware Included: | Yes |
| Weight: | 7.35kg (16.2 lbs) |
What's In The Box
- Wall Plate (1)
- Arm Left (1)
- Arm Right (1)
