Product Description
 |
 |
 |
Key Features
• 20amp capacity; Pure unpolluted 240v/220v sinewave power 24/7
• Whisper quiet servo motor for voltage calibration
• Dual LED display indicating incoming power and output power
• Other LED alerts showing various power changes instantly
• Frontline filtering and surge protection through power station
On top of the pristine power produced by the Smart Station we have included our state-of-the-art, DRM95 (meter box installation). When installed with the Smart Power Station it delivers DOUBLE the protection and DOUBLE the filtration, incorporating our Dynamic Active Tracking. This ensures a greater range of interference is captured by the Active Filter.
This configuration can be argued as being the best combination available for providing pure and precise 240 (or 220) volts to your valuable electrical equipment: Equipment that was designed to run on 240 (or 220) volt power ensuring you get maximum performance and enjoyment for many years. When it comes to minimising risk, we make no wild or glossy promises. Our products do what they say they do — it is that simple!
Product Dimensions: 436mm (W) x 195mm (H) x 380mm (D)
Features
- Pure unpolluted 240v/220v sinewave power 24/7
- Whisper quiet servo motor for voltage calibration
- Delay start secondary protection strategy
- Microprocessor controls
- Dual led display indicating incoming power and output power
- Middle display shows current load of connected components
- Other led alerts showing various power changes instantly
- Frontline filtering and surge protection through power station
- 20amp capacity
Installation
DRM95 20Amp can be connected to INPUT (in front) of the Power Station or at OUTPUT (at rear) of power station. There is no right or wrong way.
Benefits of fitting to INPUT would be that the DRM95 will also protect the Power Station. The Dynamic Active Tracking Filtering and surge/spike protection will not interfere with those that believe surge protective devices can reduce or restrict in some way power load to amplifiers.
Benefits of fitting to OUTPUT would be that the Power Station has already conditioned the power and the Dynamic active Tracking Filtering can be argued as being more beneficial to connected devices at this point. Our very succesful 10 amp version has many supporters of this configuration who swear by its performance enhancements. Sometimes it may just come down to a matter of opinion.
Specifications
|
Supply Voltage |
240/Vac 50Hz |
| Maximum Current Rating | 20amps/4800 W (Va) |
| Wave Form | Pure Sine Wave (Note: Wave Form is NOT regenerated) |
| Operating Voltage | 180V - 260V |
| Output Voltage | 240V default (220v option via switch on rear) |
| Output Voltage 3% Variation | Output voltage will remain stable unless there is a 3% or more variance to incoming supply. The larger the variance the longer the "lag" time to compensate will be. |
| THD (Total Harmonic Distortion) | It supplies whatever the Power Utility generates. The THD is not changed in any way by the Power Station. |
| Installation | PS20 requires a licensed electrician to install correctly |
| Model No | PS20 |
| Double Filtration Management | DRM95 20amp - Din Rail Mount Industrail Surge Protector incorporating Dynamic Active Tracking Filter technology |
