Product Description
 |
 |
 |
 |
 |
 |
 |
Key Features
• Receives 4K UHD HDBaseT transmissions up to 35m
• Compatible with 4K HDR source content
• Compatible with HDCP 2.2 protected content
• 2-way PoH enabled for convenient PSU-free installation
• RS-232 and IR passthrough for control of peripheral equipment
Compact Class B HDBaseT receiver supporting 4K HDR transmissions up to 35 meters from a compatible HDBaseT matrix or presentation switcher. 2-way PoH allows the RX-35-POH to power over category cable from a PoH matrix or switcher and also allows for the receiver to power in-wall HDBaseT transmitters.
CLASS B HDBASET™
Small in size but not in specification, the RX-35-POH is no different to the modern H2 family of products, supporting pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 35m/115ft or 1080p to 35m/115ft.
CONTROL OPTIONS
Supports 3 methods of control pass-through. Being a pure HDBaseT™ device, the RX-35-POH can handle bi-directional IR, RS-232 and even CEC routing when used as part of a compatible WyreStorm matrix or extender system.
POH
The RX-35-POH can be powered by a PoH compatible matrix or presentation switcher meaning one less thing to think about when specifying & installing a WyreStorm system.
FULLY COMPLIANT WITH HDCP 2.2 ENCRYPTION
As with all of our HDBaseT Receivers, remaining relevant & legal is key to their operation. The RX-35-POH is compliant with the strict anti-piracy algorithms that prevent the unauthorized distribution of content, meaning a trouble-free installation.
Specifications
Audio and Video |
||||
| Inputs | 1x HDBaseT In 8-pin RJ-45 female | |||
| Outputs | 1x HDMI 19-pin type A | |||
| Output Video Encoding | HDBaseT Class B | |||
| Encoding Data Rate | 9.2Gbps | |||
| End to End Latency (Max) | 10μs (micro seconds) | |||
| Audio Formats | 2ch PCM | Up to DTS-X and Dolby Atmos | |||
| Video Resolutions (Max) | Video Resolutions 1920x1080p @60Hz 16bit 3840x2160p @60Hz 10bit 4:2:0 HDR 4096x2160p @60Hz 8bit 4:2:0 |
HDMI 7m/23ft 5m/16ft 5m/16ft |
Cat6 70m/230ft 35m/115ft 35m/115ft |
Cat6a/7 70m/230ft 35m/115ft 35m/115ft |
| Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference | ||||
| Supported Standards | DCI | RGB | HDR10/10+ | HLG | BT.2020 | BT.2100 | |||
| Maximum Pixel Clock | HDMI: 297Mhz | HDBaseT: 297MHz | |||
Communication and Control |
||||
| HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included) | |||
| HDBaseT | HDCP 2.2 | EDID | PoH 2-way | Bidirectional IR, RS-232 | |||
| IR | 1x IR TX 3.5mm (1/8in) Mono | 1x IR RX 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT™ | |||
| RS-232 | 1x 3-pin Phoenix Connector | Bidirectional over HDBaseT™ | |||
Power |
||||
| Power Supply | 12V DC (Optional) | |||
| PoH | 2-way | |||
| Max Power Consumption | 7.2W | |||
Environmental |
||||
| Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C), 10% ~ 90%, non-condensing | |||
| Storage Temperature | -4°F to ~ 158°F (-20°C ~ +70°C), 10% ~ 90%, non-condensing | |||
| Maximum BTU | 24.6 BTU/hr | |||
Dimensions & Weight |
||||
| Rack Units/Wall Box | <1U | |||
| Height | 21mm/0.82in | |||
| Width | 140mm/5.5in | |||
| Depth | 80mm/3.14in | |||
| Weight | 0.29kg/0.65lbs | |||
Regulatory |
||||
| Safety and Emission | CE | FCC | RoHS | RCM | EAC | |||
What's In The Box
- 1x RX-35-POH Receiver
- 1x 12V 2A Power Adaptor
- 1x IR Emitter
- 1x IR Receiver
- 2x Mounting Brackets
- 1x 3 Pin Phoenix Male Connector
- 1x Quickstart Guide
