Product Description
Key Features
• Receives 4K60 4:2:2 12-bit HDBaseT transmissions up to 100m
• Bidirectional IR, RS-232 and CEC communication
• 10/100 Ethernet port for extension of LAN from TX
• Compatible with DVI-I and DP++ v1.3 signals from compatible devices
• Bidirectional USB 2.0 passthrough offering 190Mbps transfer & HID extension
• Automatically activated DSC lossless compression handles HDMI content up to 17.8Gbps
100m 4K60 HDBaseT DSC Receiver with USB
Utilizing the best in HDBaseT technology, the RX-700 extends 5-Play functionality to your display device over 100m/328ft of Cat 6 cable.
Using DSC (display stream compression) the RX-700 can support HDMI video up to 2160p 4:4:4 at 60Hz without any visual loss in quality or latency. With HID’s and data transfer in mind, the RX-700 supports data transmission of USB 2.0 devices like HD webcams, smart whiteboards and flash drives alike.
Features
- HDBaseT Receiver supporting:
- Content up to 4K/60 4:4:4 & RGB 8-bit
- The latest HDR standards, including HDR-10, HLG and Dolby Vision at 30Hz
- HDCP 2.3 encryption technology ensuring compatibility with the latest 4K UHD content and sources
- HD Multichannel audio up to DTS:X and Dolby Atmos to all outputs
- 2160p 4:4:4 or 4:2:2 12-bit HDR content from a source to a display or projector using HDBaseT up to 100m/328ft
- Automatically activated DSC lossless compression handles HDMI content up to 17.8Gbps
- HDMI output supports bandwidths of up to 18Gbps
- Compatible with DVI-I and DP++ v1.3 signals from compatible devices
- Bidirectional USB 2.0 passthrough offering 190Mbps transfer and HID extension
- Features 4 USB device ports
- 10/100 Ethernet port for extension of LAN from TX
- Bidirectional audio lane separate to HDMI signal sends and receives analog audio signals at either end (requires supporting TX device)
- Bidirectional IR, RS-232 and CEC communication
- DIP Switch selection for direction of USB control, long cable mode and firmware update
- Backwards compatible with HDBaseT 1.0 transmission and receiving devices (lowest denominator takes priority)
- LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link
- 2-way PoH (Power over HDBaseT) enables the receiver to be remotely powered by the transmitter or power a transmitter
- Locking DC power jack
- 12v DC PSU with US, UK, EU & AU Power cables included
- Mounting brackets included
CLASS C HDBASET
Featuring the powerful HDBaseT 2.0 specification, UHD video & audio, Ethernet, control, USB and PoH are sent over distances of 100m/328ft. VESA recognized DSC at the point of transmission means lossless compression for HDMI & DP++ signals up to 18Gbps.
USB 2.0 PASS-THROUGH
HDBaseT™ 2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities of 190Mbps for webcams or USB peripherals.
HDMI 2.0 MAXED OUT!
Sporting an 18Gbps HDMI input, the RX-700 can support all UHD video signals up to and including 2160p 4:4:4/60, and high frame-rate HDR 12bit 4:2:2 up to 60Hz, along with multichannel audio up to DTS:X and Dolby Atmos.
DEDICATED AUDIO LANE
Running in parallel to and completely separate to the HDMI signal within the HDBaseT link, the RX-700 can also support the bi-directional transmission of 2 separate stereo audio feeds, to and from the RX-700.
Specifications
TRANSMISSION |
||||
Transmission Encoding | HDBaseT Class C | PAM16 Encoding | |||
End to End Latency | 10µs | |||
Maximum Transmission Bit Rate | 10.2Gbps | |||
VIDEO |
||||
HDMI | (v2.0b) TMDS | 600MHz Maximum with DSC (Display Stream Compression) | |||
Input | 1x HDBT In: 8-pin RJ45 | |||
Output | 1x HDMI Out: 19-pin Type A Female | |||
Maximum Pixel Clock | HDMI: 600MHz | HDBaseT: 340MHz | |||
Video Resolutions (Max) | Video Resolution | HDMI | Cat6 | Cat6a/7 |
1920x1080p @60Hz 2560x1440p @144Hz 3840x2160p @60Hz 8bit 4:4:4 3840x2160p @60Hz 10bit 4:2:0 HDR 3840x2160p @60Hz 12bit 4:2:2 HDR |
15m/49ft 15m/49ft 7m/23ft 5m/16ft 5m/16ft |
70m/230ft 100m/328ft 70m/230ft 70m/230ft 70m/230ft |
100m/328ft 100m/328ft 100m/328ft 100m/328ft 100m/328ft |
|
Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference. | ||||
Supported Standards | DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100 | |||
AUDIO |
||||
Inputs | 1x Audio In: 3.5mm (1/8in) TRS Stereo 2ch audio over HDBaseT | 1-way to TX | |||
Outputs | 1x Audio Out: 3.5mm (1/8in) TRS Stereo 2ch audio over HDBaseT | 1-way from RX | |||
Audio Formats | 2ch PCM | Multichannel LPCM | DTS-X | Dolby Atmos | |||
Maximum Sampling Rate | 192KHz | |||
Maximum Audio Channels | 32 | |||
Audio Return Channel (ARC) | Not Supported | |||
COMMUNICATION AND CONTROL |
||||
USB | 1x Type B (host) | 4x Type A (device)* USB direction must be set using switch before operation USB hub compatible | Maximum: 7 devices, 23 endpoints Maximum uplink speed: 190Mbps *USB direction must be set using switch before operation |
|||
IR | 1x IR RX: 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono | |||
RS-232 | 1x RS-232: 3-pin Phoenix | |||
HDCP | Pass-Through, 2.3 Supported | |||
EDID | Pass-Through, RX > TX | |||
Ethernet | 1x Ethernet: 8-pin RJ-45 Female | Bidirectional over HDBaseT | 100Mbps Supported | |||
Consumer Electronics Control (CEC) | One-way display trigger from TX | |||
Auto Low Latency Mode (ALLM) | Supported | |||
Variable Refresh Rate (VRR) | Supported | |||
POWER |
||||
Power Supply | 18V DC 3A | |||
Max Power Consumption | 10W | |||
Power-over-HDBaseT (PoH) | Supported, 2-way | |||
ENVIRONMENTAL |
||||
Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing | |||
Storage Temperature | -4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing | |||
Maximum BTU | 2.93 BTU/hr | |||
DIMENSIONS & WEIGHT (CONNECTOR HOUSING) |
||||
Installation | Wall mounted | Free standing | |||
Height | 25mm/0.98in | |||
Width | 25mm/9.46in | |||
Depth | 90mm/3.54in | |||
Weight | 0.62kg/1.36lbs | |||
REGULATORY |
||||
Safety and Emission | CE | FCC | RoHS | RCM | EAC |
What's In The Box
- 1x RX-700 Receiver
- 1x IR Emitter
- 1x IR Receiver
- 1x 3-pin Terminal Block
- 1x 12V DC 3A Power Supply
- 2x Mounting Brackets
- 1x QuickStart Guide