Product Description
 |
 |
 |
 |
 |
 |
Key Features
• 18Gbps HDMI input to matrix backplane
• Separate S/PDIF input for additional audio source
• Supports 4K/60 4:4:4 or RGB content
• Adds additional audio zone + DSP to an H2XC chassis
• Passes all audio formats including DTS:X and Dolby Atmos
• Switched HDMI output capable of 2160p 4:4:4 and HDR @ 60Hz
• Audio zone output: analog stereo pre-out with mirrored S/PDIF output
• Compatible with all HDR standards such as HDR-10, HLG and Dolby Vision™
• Cost-effective pure HDMI card aligns perfectly with WyreStorm Active Optical HDMI cables
Offering both an HDMI input & output, the ADZ card provides an 18Gbps link direct to the matrix backplane. Supporting both 2160p 4:4:4 8-bit & HDR content and multi-channel audio formats up to Dolby Atmos™, it offers the ability to use native HDMI connectivity without the need for a transmission port (reducing cost) and maintains an audio DSP output. It is the perfect partner for WyreStorm’s range of hybrid optical fiber HDMI cables.
18 GBPS BACKPLANE
The highest possible bandwidth that currently exists according to the HDMI 2.0 specification can be managed by the TX-H2X-ADZ and sent over distance. Newly emerging 60Hz HDR-10 & Dolby Vision content can also be handled by this powerful future-ready device.
AUDIO DSP
No two rooms or even installations are the same. That’s why we’ve coupled to each audio zone output; a powerful audio DSP, which allows an integrator to have complete control over the audio configuration. Also, a 10-band equalizer, volume and variable delay, which can be set per zone for a truly customized room-by-room balance.
GREAT VALUE OPTION
Omitting the complex HDBaseT transmission port, this card allows an input, output and audio functionality to still be added to an H2XC matrix. Whether adding just another audio zone or tapping into the 18Gbps backplane for further I/O, this card can still do it all.
HDCP2.2
The latest 4K UHD content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the growing H2 product family, all H2XC matrix cards and peripheral devices support the multi-point distribution of this content over HDMI, HDBaseT and multi-mode fibre.
Specifications
Audio and Video |
||
| Inputs |
1x HDMI In: 19-pin type A |
|
| Outputs |
1x HDMI Out: 19-pin type A |
|
| Output Video Encoding | NA | |
| Encoding Data Rate | NA | |
| End to End Latency | NA | |
| Audio Formats |
S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital |
|
| Video Resolutions (Max) |
Video Resolutions |
HDMI |
| Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference.
|
||
| Supported Standards | DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100 | |
| Maximum Pixel Clock | HDMI: 600mHz | |
Communication and Control |
||
| HDMI | HDCP 2.2 | EDID | DVI-D supported with adapter (not included) | |
| CEC | CEC power triggering | Requires CEC compatibility | |
Power |
||
| Power Supply | Internal to Matrix | |
| Max Power Consumption | Matrix Dependent | |
Environmental |
||
| Operating Temperature | Matrix Dependent | |
| Storage Temperature | Matrix Dependent | |
| Maximum BTU | Matrix Dependent | |
Regulatory |
||
| Safety and Emission | Matrix Dependent | |
