WyreStorm IR Link Cable For Control System Integration

Product Description

IR Link Cable for Control System Integration

The WyreStorm CAB-IR-LINK integration cable provides integrators with a simple 2-way IR integration between WyreStorm products and any mainstream control system.

Simply plug the CAB-IR-LINK cable from the IR emitter output of any control system to the IR RX port of a WyreStorm matrix or extender set to achieve seamless control system compatibility and integration.

CONTROL SYSTEM BRIDGE Literally “bridging” the gap between the control system and the distribution system, the CAB-IR-LINK is an essential part of any installers arsenal. Gone are the days of stripping back pre-moulded TRS cables to carry IR control signals.
		LONG CABLE IDEAL FOR RACK INSTALLS At 2m/74”, the CAB-IR-LINK is long enough to meet the requirements of the neatest of rack installers, enabling it to be laced neatly between the control system and the distribution system.
AUTO-SENSING COUPLER Not just another dumb jack cable, the CAB-IR-LINK has a built-in circuit that will auto-sense incoming voltage & polarity and convert it to a signal suitable for connection to WyreStorm matrix or NetworkHD system.
		3-POLE – 2-POLE CONVERSION The CAB-IR-LINK has been designed with ease of use and the installer in mind. A 2-pole (mono) TRS jack is fitted to the end designed to connect to the IR emitter output of a control system and the 3-pole (stereo) end is designed to connect to the IR-RX input on a WyreStorm matrix or NetworkHD encoder.

Specifications

COMMUNICATION & CONTROL

• IR:

• 1x IR In: 3.5mm (1/8in) TRS Stereo
• 1x IR Out: 3.5mm (1/8in) TS Mono

ENVIRONMENTAL

• Operating Temperature: 32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing
• Storage Temperature: -4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing
• Maximum BTU: NA

DIMENSIONS & WEIGHT

• Cable Length: 2.0m
• Weight: 0.48kg

What's In The Box

• 1x CAB-IR-LINK Cable