Product Description
Key Features
• Zero-configuration switch setup using unicast technology
• Supports up to 1080p @ 60Hz video content
• Hugely scalable I/O, utilizing multicast technology
• Analog audio de-embed for easy connection to external audio DSP or amplifier
• Live video preview streams for use with NetworkHD Touch or a custom control UI
• Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
The NHD-110-TX is the AV encoder to the powerful 110 series of NetworkHD AV over IP components. The NetworkHD 110 series takes the award-winning 100 series and elevates to a new level. The 110 series components support both H.264 and H.265 video encoding/decoding. With H.265, video transmissions look better than ever and use up to 6x less bandwidth.
AV streams are fully secure over the network using AES 128-bit encryption methods, ensuring any sensitive data cannot be maliciously accessed. Of course, the series would not be complete without retaining the powerful video wall and Multiview processing found in the 100/200 series. The 110 series does one better by eliminating the need for a dedicated video wall processing decoder as the standard NHD-110-RX natively has this ability. Last but not least, the 100, 110 and 200 series components are interoperable, making retrofit installs a breeze and maintains compatibility with the NHD-250-RX for Multiview.
Features
Encoder (Transmitter)
- Flexible encoding using either H.264 or H.265 encoding. Encoding is configurable between a constant bitrate or variable bitrate
- Compatible with NHD-250-RX Multiview receiver
- Live video preview streams for use with NetworkHD Touch or a custom control UI
- Customizable, IR or RS-232 control of connected devices
- Custom EDID management with import/export
Decoder (Receiver)
- Interoperable with NHD-100-TX and NHD-140-TX
- Image scaling – use mixed resolution displays throughout an installation
- Customizable CEC, IR or RS-232 control of connected devices
- Up to 16×16 video walls with image scaling, bezel compensation and rotation
- Custom “No Source” idle image upload for branded down time
- Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
General
- Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
- Supports up to 1080p @ 60Hz video content
- Support all SD and HD formats – including interlaced content
- Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
- Analog audio de-embed for easy connection to external audio DSP or amplifier
- Seamless video switching – no black screens or freeze frames
- Hugely scalable I/O, utilizing multicast technology
- Zero-configuration switch setup using unicast technology
- Flexible IP address settings: AutoIP/Static/DHCP
- Infrared signal generation via API – supports Hex Global Cache format
- Batch firmware update and batch settings functions offers a massive reduction on installation times
- HDCP 1.4 compliant
- IEEE 802.3af PoE compliant PD
- Compatible with NHD-000-RACK4 rack mounting kit (brackets included with encoder/decoder)
Specifications
Encoder (Transmitter) | Decoder (Receiver) | |
AUDIO AND VIDEO |
||
Inputs | 1x HDMI In 19-pin HDMI type A female | 1x 8-pin RJ-45 female | 10/100Base-T |
Outputs | 1 x 3-pin Phoenix Analog Audio (de-embed from HDMI input) |
1 x HDMI 19-pin HDMI type A Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network. |
Audio Formats | LPCM/MPEG4 AAC stereo, 48KHz | |
Output Video Encoding | Primary Stream – H.264/H.265, configurable up to 30MbpsPreview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps | - |
Video Encoding | - | Primary Stream – H.264/H.265, configurable up to 30Mbps |
Video Resolutions (Max) | HDMI: 1920x1080p @60Hz 8bit (15m/50ft) Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft) | |
End to End Latency | High Quality Mode: ~250msLow Latency Mode: ~80ms | |
Maximum Pixel Clock | 165MHz | |
COMMUNICATION AND CONTROL |
||
HDMI | HDCP 1.4 | EDID | HDCP 1.4 | EDID | CEC (configurable) |
RS-232 | 1 x 3-Pin Phoenix – API controlled from NHD-000-CTL | |
LAN | 1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af | |
IR | 1x IR TX: 3.5mm TS Jack Socket 1x IR RX: 3.5mm TS Jack SocketIR signals can be bi-directional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices |
|
USB | 1 x Type B Host USB v1.1 for KVM applications – bandwidth is 115200bps (routable) | 2 x Type ADevice PortsUSB v1.1 for KVM applications – bandwidth is 115200bps (routable) |
POWER |
||
Power Supply | PoE | 12V 1A DC | |
Max Power Consumption | 6W (DC adapter) | |
ENVIRONMENTAL |
||
Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C)10% ~ 90%, non-condensing | |
StorageTemperature | -4°F to ~ 158°F (-20°C ~ +70°C)10% ~ 90%, non-condensing | |
Maximum BTU | ||
DIMENSIONS & WEIGHT |
||
Rack Units/Wall Box | ||
Height | 1" | |
Width | 6.875" | |
Depth | 3.875" | |
Weight | 0.5kg (1.1lbs) | |
REGULATORY |
||
Safety and Emission | CE | FCC | RoHS | RCM | EAC |