Product Description
 |
 |
 |
 |
 |
 |
Key Features
• Supports video content up to 1920x1080p @60Hz 8bit
• Multiple simultaneous encoded outputs using different stream formats
• Supports audio sampling rates of 32Khz, 44.1Khz and 48Khz
• 3.5 mm input for secondary audio encoding separate to HDMI audio
• HDMI loop out for connection to a local monitor or secondary distribution system
• Low bandwidth H.264 network transmission supports configurable encoding rates between 16Kb/s~12Mb/s
NetworkHD™ 300 Series 1080p AV over IP H.264 Open Standards Encoder
The NHD-300-TX is a powerful A/V encoder that allows streaming of 1080p HDMI content over a network in a myriad of ways. By supporting standard protocols such as RTSP, RTMP, Unicast and Multicast, transmissions can be decoded by a broad range of 3rd-party hardware and software solutions. Easily live stream events to popular platforms such as YouTube, Facebook, Wowza, OBS through native options in the powerful Web UI.
The NHD-300-TX is great for Schools and Universities to broadcast lessons to students, Churches for sharing services and any application where sharing content over a network is required.
- Supports video content up to 1920x1080p @60Hz 8bit
- HDMI loop out for connection to a local monitor or secondary distribution system
- 3.5 mm input for secondary audio encoding separate to HDMI audio
- 802.11af PoE compatibility allows encoder to power from a network switch while retaining 12v DC power for flexible power options
- Low bandwidth H.264 network transmission supports configurable encoding rates between 16Kb/s~12Mb/s
- Flexible audio encoding allows selectable options between MP3 or AAC formats at up to 384Kb/s
- Supports audio sampling rates of 32Khz, 44.1Khz and 48Khz
- Feature rich and intuitive Web UI allowing several customization options and configurations
- Native compatibility with popular platforms such as YouTube, Facebook, Wowza and many more
- Uses standard network streaming protocols such as HTTP, RTSP, RTMP, UDP, Multicast and Unicast
- Small form factor design that is compatible with NetworkHD series rack mounts
- Multiple simultaneous encoded outputs using different stream formats
Specifications
AUDIO AND VIDEO |
|
| Inputs | 1x HDMI In 19-pin HDMI type A1x Audio In: 3.5mm (1/8in) TRS Stereo |
| Outputs | 1x LAN (PoE) 8-pin RJ-45 female, 1000Base-T1x HDMI 19-pin HDMI Type A (Loop Out) |
| Encoding Data Rate | Max: 12Mb/s (Configurable) |
| Audio Formats | 2ch LPCM @ 32KHz, 44.1KHz, 48KHz |
| Output Video Encoding | H.264 |
| Video Resolutions (Max) |
HDMI 1920x1080p @60Hz 8bit (15m/50ft) Using Cat6/6a/7 1920x1080p @60Hz 8bit (100m/328ft Point to Point) |
| Output Audio Encoding | AAC, MP3 @ 320Kb/s (Max) |
| End to End Latency (Max) | 80ms (TCP/UDP), 1500ms (HTTP) |
| Maximum Pixel Clock | 150 MHz |
COMMUNICATION AND CONTROL |
|
| HDMI | HDMI 1.4 | HDCP Encryption Not Supported |
| Ethernet | 1x LAN: 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE |
NETWORK |
|
| Protocols | HTTP, RTSP, RTMP, UDP, Multicast, Unicast, DHCP |
POWER |
|
| Power Supply | 12V DC 2A |
| PoE | IEEE 802.3af | 15.4W at PSE |
| Max Power Consumption | 3.6W (with PSU) |
ENVIRONMENTAL |
|
| Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C)10% ~ 90%, non-condensing |
| StorageTemperature | -4°F to ~ 158°F (-20°C ~ +70°C)10% ~ 90%, non-condensing |
| Maximum BTU | 16 BTU/hr |
DIMENSIONS & WEIGHT |
|
| Rack Units/Wall Box | <1U flat on shelf | 6U in NHD-000-RACK4 | 1U in NHD-140-RACK-1U |
| Height | 25mm/1in |
| Width | 215mm/8.46in |
| Depth | 142mm/5.59in |
| Weight | 0.65Kg/1.41lbs |
REGULATORY |
|
| Safety and Emission | CE | FCC | RCM | EAC | ROHS |
What's In The Box
- 1x AV over IP Encoder
- 1x Set Wall Mounting Brackets
- 1x Set Rack Mounting Brackets (NHD-000-RACK4)
- 4x Silicone Feet
- 4x Panhead Screws
- 1x Quickstart Guide
Note: This encoder is PoE powered. Optional 12v DC power supply available separately.
