Product Description
 |
 |
 |
 |
 |
 |
 |
Key Features
• Low Profile 4K/UHD HDMI/VGA auto-switch HDBaseT extender set
• Support HDCP 2.2, HD audio, 3D, 36bit Deep color
• Transmit HD resolution up to 100m & 4K@60Hz up to 70m
• 3.5mm jack on receiver de-embeds HDMI or VGA audio from the incoming signal
• TRANSPORTS: HDMI and VGA (with audio) + Ethernet + RS232 + 2-way IR + 2-way PoH
With HDMI up to 4K@60Hz YUV4:2:0 and VGA up to 1920 x 1200@60Hz, the EX-SW-0201-4K extender set offers 5Play compliance for distribution of 4K and HD video, HD audio, bidirectional IR and RS-232 control of the HDMI source, 2way power and Ethernet using HDBaseT Class A technology for reliable transmission over distances up to 70m/230ft (4K) or 100m/328ft (1080p).
In addition, EDID and DIP setting management allows for RS-232 and Long Cable modes to be toggled, as well as the manual setting of resolutions for improved communication and compatibility between source and display devices.
The EX-SW-0201-4K auto-switching transmitter automatically detects and selects a newly connected HDMI or VGA device for minimal effort needed by the user and also features a 3.5mm stereo mini-jack audio input to embed audio within the VGA signal.
The EX-SW-0201-4K receiver delivers the transmitted 5Play signal to the display device with a 3.5mm mini-jack to de-embed audio from the incoming HDMI or VGA signal for connection to the display device or local speakers
Both transmitter and receiver feature bidirectional PoH for either unit to be powered remotely by the other for an even more flexible installation, and also feature LED Power, Status, HDCP and Link indication to visually indicate signal activity and correct unit functionality.
Features
- A full-featured 5-Play HDBaseT extender set with the added feature of a VGA/HDMI auto-switching transmitter
- 5Play compliance supporting the extension of 4K and HD video, HD audio, Ethernet, Control and power along a single Cat6 cable
- Transmit HD resolutions up to 1920x1200 to 100m/328ft
- Transmit 4K@60Hz (4096x2160) to 70m/230ft
- HDCP 2.2 compliant
- 3D supported
- Auto-switching transmitter detects and selects VGA (+audio) and HDMI devices as soon as the source is connected
- Two-way PoH gives flexible installation options by allowing either the transmitter or receiver to be powered remotely
- Audio embed on transmitter and audio de-embed on receiver via 3.5mm jack connection for HDMI or VGA
- EDID management and DIP switch selection for manual setting of resolution, RS-232 control/firmware update function and long cable mode
- Low-profile 18mm chassis for unobtrusive installation
- Cable termination follows IEEE-568B standards
- LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link.
- Threaded bushings allow use of both standard and locking DC power plugs
- Energy efficient universal power supply included
- Mounting brackets included
Specifications
Audio and Video |
|
| Inputs | 1x HDMI 19-pin type A 1x Audio In 3.5mm (1/8in) Stereo Jack 1x HDBT 8-pin RJ-45 female |
| Outputs | 1x HDMI 19-pin type A 1x Audio Out 3.5mm (1/8in) Stereo Jack 1x HDBT 8-pin RJ-45 female |
| Audio Formats | 2ch PCM | Up to 7.1 DTS-X and Dolby Atmos |
| Video Resolutions (Max) | HDMI 1920x1080 @60Hz 48bit (15m/50ft)
|
| Color Depth | 1080p: 48bit | 4K UHD: 24bit |
| Maximum Pixel Clock | 297MHz |
Communication and Control |
|
| HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included) |
| HDBaseT | HDCP 2.2 | EDID | PoH (2-way) | Bidirectional IR and RS-232 |
| Ethernet | 1x 8-pin RJ-45 female 10/100 Mbps auto-negotiating |
| IR | 1x IR TX 3.5mm (1/8in) Mono 1x IR RX 3.5mm (1/8in) Stereo Bidirectional over HDBaseT |
| RS-232 | 1x 3-pin Screw Down Phoenix Connector Bidirectional over HDBaseT |
Power |
|
| Power Supply | Input: 100~240V AC 50/60Hz Output: 12V DC 2A |
| Max Power Consumption | 26.5W |
| PoH (2-way) | 48V 15.4W |
Environmental |
|
| Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C) 10% ~ 90%, non-condensing |
| Storage Temperature | -4°F to ~ 158°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing |
Dimensions and Weight |
|
| Height | 20mm/0.79in |
| Width | 200mm/7.87in |
| Depth | 134mm/5.28in |
| Weight | 0.6kg/1.32lbs |
| Regulatory | |
| Safety and Emission | CE | FCC |
What's In The Box
- 1x EX-SW-0201-4K Transmitter
- 1x EX-SW-0201-4K Receiver
- 1x 12V DC 2A Power Supply (US/UK/EU)
- 2 x 3-pin Screw Down Phoenix Connectors
- 2x IR Emitters
- 2x Wide-band IR Receivers (30-50KHz)
- 4x Mounting Brackets (1pr for TX and 1pr for RX)
- 1x Quickstart Guide
