Product Description
Key Features
• 4×4 HDMI 2.0 Matrix Switcher
• Supports 4K/60 4:4:4, HDR, HDCP2.3 compliant
• Individual volume adjustment on each L+R output
• Supports 4K to 1080p down-scaling on outputs 3 & 4
• HDMI out provides 2.5W to power Active Optical Cables (AoC)
• HDMI Output supports up to 5V500mA for AoC cables
• Controllable by front panel, IR, RS232 and TCP/IP
• Audio Matrix, audio out can de-embedded from any input or output
Professional 4K 4x4 HDMI Matrix Switcher
This product is a professional 4×4 HDMI 2.0 Matrix Switcher with built in Audio Matrix. It includes 4 HDMI inputs, 4 HDMI outputs and the last two outputs feature down-scaling, which is designed for switching two HDMI2.0 and HDCP2.3 compliant signals. It also features 4 SPDIF and 4 analog audio outputs for the audio matrix.
Pro Kit includes 4 x HD320 4K HDR HDMI & IR over HDBaseT PoC extender sets and 4 x ZIGEN 2M HDMI cables
Specifications
Video |
|
Video Input | (4) HDMI |
Video Input Connector | (4) Type-A female HDMI |
Video input Video Resolution | Up to 4K@60Hz 4:4:4 |
Video Output | (4) HDMI |
Video Output Connector | (4) Type-A female HDMI, |
Video output Video Resolution | Up to 4K@60Hz 4:4:4 |
HDMI Output | Supports up to 5V 500mA for AoC cable |
HDMI Version | Up to 2.0 |
HDCP Version | Up to 2.3 |
HDMI Audio Signal | LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through. |
Digital Audio Output |
|
Output | (4) Digital SPDIF audio |
Output Connector | (4) Toslink connector |
Digital SPDIF Audio Format | Supports PCM, Dolby Digital, DTS, DTS-HD |
Frequency Response | 20 Hz to 20 kHz, ±1dB |
Max Output level | ±0.05dBFS |
THD+N | < 0.05%, 20 Hz – 20 kHz bandwidth, 1 kHz sine at 0dBFS level (or max level) |
SNR | > 90dB, 20Hz-20 kHz bandwidth |
Crosstalk Isolation | < -70 dB, 10 kHz sine at 0dBFS level (or max level before clipping) |
Noise | -90dB |
Analog Audio Output |
|
Output | (4) Analog L/R Audio |
Output Connector | (4) L&R (RCA) |
Digital SPDIF Audio Format | PCM 2CH |
Frequency Response | 20Hz to 20KHz, ±1dB |
Max output level | 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316 mV) nominal consumer line level signal |
THD+N | < 0.05%, 20Hz – 20KHz bandwidth, 1KHz sine at 0dBFS level (or max level) |
SNR | > 80dB, 20Hz-20KHz bandwidth |
Crosstalk Isolation | < -80 dB, 10KHz sine at 0dBFS level (or max level before clipping) |
L-R Level deviation | < 0.05dB, 1 KHz sine at 0dBFS level (or max level before clipping) |
Frequency Response Deviation | < ± 0.5dB 20Hz – 20KHz |
Output Load Capability | 1Kohm and higher (supports 10x paralleled 10k ohm loads) |
Noise | -80dB |
Control |
|
Control Port | (1) IR REC, (1) RS232, (1) FIRMWARE, (1) TCP/IP |
Control Connector | (1) 3.5mm jack, (1) 3-pin terminal block, (1) USB-A,
(1) RJ45, |
General |
|
Transmission Distance | 4K/60Hz/444 5m, 4K/60Hz/420 10m,1080P 15m |
Bandwidth | 18Gbps |
Operation Temperature | -5~ +55℃ |
Storage Temperature | -25 ~ +70℃ |
Relative Humility | 10%-90% |
External Power Supply | Input: AC 100~240V, 50/60Hz; Output: 24V DC 1.25A |
Maximum Power Consumption | 18W (Max) |
Dimension (W*H*D) | 436.4mm*44mm*236mm |
Net Weight | 2.6kg |