Product Description
 |
 |
 |
 |
Key Features
• LCD display for real-time status and measurements
• 1 slot for optional communication card
• Pure sinewave output for sensitive equipment
• HID-Compliant USB port for automatic integration with Win/Mac OS/Linux
• Intelligent Power® Software Suite compatible with all major OS including virtualisation software
Eaton 5SC Short Depth Rack UPS
The Eaton 5SC pure sine wave UPS provides high-quality output voltage for wider compatibility with today’s active power factor corrected (PFC) power supplies in sensitive IT equipment.
Manageability
The LCD interface provides clear status of the UPS key parameters such as input and output voltage, load and battery level, and estimated runtime. Essential configuration capabilities are also offered for output voltage, audible alarm and sensitivity.
The 5SC offers USB and serial connectivity. USB port is HID compliant for automatic integration into Windows, Mac OS and Linux.
A slot for an optional communication card (including SNMP/ Web card or relay contact card) is available on rack and R/T models. Eaton’s Intelligent Power® Software Suite insures compatibility with all major OS including virtualization software.
Reliability
Pure sinewave output: When operating in battery mode the 5SC provides a high quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.
Buck and Boost operation corrects a wide range of input voltage variations through continuous regulation, without the use of batteries.
Stronger, longer battery life: Eaton ABM® battery management technology uses an innovative three-stage charging system that extends battery life by up to 50%.
Flexibility
Designed to fit into short depth wall enclosures down to 500mm, 2 post racks or to be wall mounted.
Rail kits and ANZ Input cord are included as standard. Easy battery replacement from front panel to extend UPS life
Specifications
Technical Specifications
- Rating (VA/W): 1500VA/1050W
- Format: Rack 2U
Electrical characteristics
- Technology: Line interactive High Frequency (Sinewave, Booster, Fader)
- Input voltage range without using batteries: 184 to 276 V
- Output voltage and frequency: 230V (-10/+6 %) (Adjustable to 220/230/240 V), 50/60 Hz ± 1Hz (Autosensing)
Connections
- Input: 1 IEC C14 (10A)
- Outputs for Rack or R/T models: 8 IEC C13 (10A)
Batteries
- Typical backup times @50 and 70% load*: 13/8
- Battery management: ABM, automatic battery test, deep discharge protection
Communication
- Communication ports: 1 USB port + RS232 serial port (USB and RS232 cannot be used simultaneously) ROO/RPO + card slot for Network-M2 card or Relay-MS card
Operating conditions, standards and approvals
- Operating temperature: 0 to 40°C
- Noise level: <45dB
- Safety: IEC/EN 62040-1, UL1778
- EMC: IEC/EN 62040-2
- Approvals: CE /CB report (TUV), cTUVus ,RCM
Dimensions H x W x D in mm/ Weight
- Dimensions: 86.2 x 440 x 405 mm
- Weight: 17.8kg
Customer service and support
- Warranty: 2 years
* Runtimes are shown @ 0.7 power factor. Backup duration is approximate and may vary with equipment, configuration, battery age, temperature, etc.
In the interests of continuous product improvement all specifications are subject to change without notice.
