Product Description
Key Features
• Control your roller shutters remotely
• Small, discreet and aesthetically pleasing
• Up/down function and positioning
• Compatible with mechanical or electronical stop motors
• Compatible with BSO and venitian blinds with positioning of the slats
Roller Shutter 3
FIBARO Roller Shutter 3 is a new version of the radio-controller based on Z-Wave 5 technology. It works with motorized roller blinds, venetian blinds, awnings and gates. The Roller Shutter 3 is powered by a single-phase AC and provides precise positioning of blinds, awnings or gates so they can be set to the position you choose. The module is also equipped with a power metering feature when used with a FIBARO Home Center.
Features
- Compatible with any Z-Wave or Z-Wave+ Controller,
- Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption,
- To be installed with roller blind motors with electronic or mechanical limit switches,
- Advanced microprocessor control,
- Active power and energy metering functionality,
- Works with various types of switches – momentary, toggle and dedicated roller blind switches,
- To be installed in wall switch boxes.
Specifications
Power supply: | 100-240V~ 50/60 Hz |
Rated load current: | 4.2A for lamps and resistive loads 1.7A for motors with compensated power factor (inductive loads) |
Supported motor type: | single-phase AC motors |
Required limit switches: | electronic and mechanic |
Power consumption: | up to 0.8W |
Operating temperature: | 0-35°C |
Active element: | micro-gap relay switch μ |
For installation in boxes: | Ø ≥ 50mm, depth ≥ 60mm |
Radio protocol: | Z-Wave (500 series chip) |
Radio signal power: | EIRP up to 6dBm |
Radio frequency: | 868.4 or 869.8 Mhz EU 908.4 or 916.0 Mhz US 921.4 or 919.8 Mhz ANZ 869.0 Mhz RU |
Range: | up to 50 m outdoors up to 30 m indoors (depending on building materials) |
Dimensions: (L x W x H): | 42.50 x 38.25 x 20.30 mm |
Compliance with EU directives: | RoHS 2011/65/EU RED 2014/53/EU |