Product Description
Key Features
• Two-pole switching (L+N) of the power ports
• Event and schedule controlled switching
• 2 connectors for plug-and-play sensors
• Fast and easy installation
• NTP function can be activated
• Integrated overvoltage protection type 3
• Precise current metering of up to 9 units and residual current
6-Fold All-Pole Switched and Metered PDU
Expert Power Control for more operational security and energy efficiency in 19-inch installations
- Fewer and shorter failures of IT and AV installations
- Increased safety for users due to all-pole switching operation, i.e. both phase and neutral (L+N) are switched
- Detect AV and IT problems at an early stage: Proactive power and environment monitoring
- Increased energy efficiency (Green IT and AV): Reduction of electricity costs and CO2 emissions
- Integrate anywhere: Quickly and easily integrate anywhere with API interface: REST API, https, SNMP, Telnet and MQTT
- Fix AV and IT problems quickly and effectively: Reboot remotely, directly on the device or with an automatic restart thanks to integrated Watchdog
Switching Function
- Each power port can be switched via HTTP/S, Telnet, SSH, SNMP or command line interface, as well as via serial interface
- Programmable on/off sequences for remote reboots (Remote Reboot)
- Power ports can be switched when preset sensor thresholds are exceeded
- Self-healing function thanks to 6-channel watchdog: The power ports can be assigned its own Watchdog (ICMP/TCP), which initiates an automatic restart if necessary
- Switching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure
- Current peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second
Metering Function
- Power consumption metering (kwH) with 2 energy counters: one counter counts consistently, the other counter is resettable
- Metering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
- Metering of differential current type A (mA)
- 2 connectors for combined plug-and-play sensors (temperature, humidity and air pressure)
Security
- Protection for users thanks to all-pole disconnection of connected loads
- Integrated type 3 overvoltage protection prevents damage to the device and connected loads (L-N, L/N-PE), status retrievable via network
- Long-life High-Inrush Relays prevent welding of relay contacts during inrush current peaks
- Generation of status messages (e-mail, syslog and SNMP traps)
- Encrypted e-mails (SSL, STARTTLS)
- Access protection by IP access control
- Encrypted communication through SSH
- Secure Login via SSL
- Beeper for audible alarm when sensor limits are exceeded/deceeded
- IEC-lock connectors prevent accidental disconnection of cables by a patented locking mechanism
Operation
- Easy-to-read LED display for displaying total current, IP address and sensor values
- Firmware update via Ethernet during operation (no restart required)
- Simple and flexible configuration via web browser, Windows or Linux program
- Dynamic assignment of an IP address via DHCP or manual assignment of static IP address
- Convenient control on the go via free GUDE Control+ app (Android and iOS)
Massive Time and Cost Savings Through Plug-and-Play Drivers from Our Technology Partners
Specifications
Technical Details
- Dimensions: 19 inch, 1 rack unit
- LxHxD: 43.9 x 4.4 x 19.5 cm (without brackets)
- Weight: ca. 2.9 kg
- Operating temperature: 0-50 °C
- Storage temperature: -20 - 70 °C
- Relative humidity: 0 - 95 % (non-condensing environment)
Electrical Connections
- Power supply IEC C20, max. 16 A, 230 V
- Power Ports: 6 IEC C13 Lock, max. 10 A
- Ethernet connector RJ45 (10/100 Mbit/s)
- Serial interface RS232 (Sub-D 9-pin)
- 2 RJ45 interfaces for optional sensors