Product Description
CABLE MANAGEMENT
MFB manufacture a large range of cable management solutions to suit every situation.
MFB can also custom make cable management products to your specific needs.
LACING RINGSPositioned at any available hole, cables are bunched and tied together. Rings provide support at the point where cables branch off to equipment. |
LACING BARSLacing Bars provide additional cable support and can be used at any location within the rack. |
EARTH BARThe copper earth bar mounts vertically in the racks and comes with M6 tapped holes at 100mm pitch. Also available is an optional Insulation bush. Tin plated copper 3mm x 20mm. |
SIZE | VERTICAL | HORIZONTAL | TYPE | |||
A | 50mm Round | RU | WIDTH | 12 | ||
B | 100mm Square | 12 | 19" | 18 | ||
C | 1RU Rectangle | 18 | 24 | |||
Recessed Rings (to suit Class C) | 24 | 27 | ||||
Recessed Rings | 27 | 33 | ||||
33 | 39 | |||||
39 | 42 | |||||
42 | 45 | |||||
45 | Earth Bar Insulation Bush Assembly |
CABLE RETAINING HOOP PANELFitted with 5 hoops that feature open ends. It is designed to fit across the 19” racking to provide a sturdy support for cables. Finished in black powder coat. |
HORIZONTAL WIRE MANAGEMENT TRAYThis 1RU tray is designed to provide cable support and distribution for use with patch panels etc. Finished in black powder coat. |
HINGED CABLE CARRIERDesigned to mount to the rear of telescopic equipment and provide a support for cables when being moved in and out. |
||||||||
|
|
Got a really big job? Talk to us about their S100 High Density Open Patching Frame and 300w ducting options.
PVC CABLE DUCTINGCables are retained inside ducting by snap on cover and exit from ducting through the slots provided. Ducting size 80mm wide x 60mm deep. Made of PVC.
|
HORIZONTAL CABLE DUCTS2RU Horizontal Cable ducts may be used to bridge cables across racks, these ducts feature finger openings that come with plastic cable protectors to guide the cables smoothly without the risk of sharp bends occurring. These fingers run along both sides of the duct. The unit is also fitted with a cover. Constructed in steel and come with a black powder coat finish. WIDTH: 19" |
ROOF CABLE DUCTThis 2 stage fully adjustable cable duct extends from 450mm to 850mm. The addition of a third section extends it up to a further 400mm. Mounts directly onto the roof gland plate opening. Both sections are in two parts allowing the duct to be assembled around existing cabling. Powder coat finish in customer choice of colour. Suits all cabinets with top gland plate including wall mount cabinets. Note: The third section is the lower section mounted upside down. TYPE:
|
OVERHEAD CABLE DUCT SYSTEMDesigned to accommodate a large number of cables across a suite of S2005 cabinets. The 200mm wide duct sits above the roof panel and provides a “drop in” feature, which allows cables to enter the cabinet in the correct position. The rail kit offers the flexibility to mount the duct at any position throughout the depth of the rack. This also provides the ability to add additional ducts for extra width. Both the 700 wide and 800 wide have the “drop in” feature. Assembly is easy with all required fixing points already on the rack, simply screw in the rails kits and fix on the duct sections.
|
CABLE GLAND EDGE PROTECTORThis easy to apply protector can be cut to length and grips to the edge of the steel for superior protection of cables. Edge protector can be used on any cable cut out no matter the shape or size.Note: To suit standard 200 x 75 cable gland opening.
|
||
SUPPORT RAIL KITSUITS DEPTH
|
CABLE DUCTSUIT WIDTH
|