Product Description
 |
 |
 |
 |
Key Features
• 4 Australian sockets and 2 x 10 Amp IEC outlets
• Emergency Power Off Function (EPO)
• Programmable power outlets
• Wide input voltage range
• Input power factor correction 0.98
• USB, RS232, SNMP and AS400 multiple communications available
• Backup time for all models is easily extended by simply plugging additional battery banks
PowerShield Centurion Tower 3000VA
For critical loads the PowerShield PSCE3000 Centurion offers the best protection against all potential power disruptions and anomalies. This UPS takes the mains power in AC, converts it to DC and then converts the DC back to AC to feed your equipment. In this way, your equipment is completely independent of fluctuations in the mains grid. Regardless of the power fluctuations, your equipment is fed by a stable power source. This is especially important if you have generators present, are in remote areas and near industrial areas. Equipped with 4 Australian and 2 IEC C13 10A outlets. Includes management software to suit most operating systems.
Visit the PowerShield UPS Sizing Guide. which will help you select the correct UPS for your power protection needs.
Features
- True Online Double Conversion
- Wide input voltage range
- Input power factor correction 0.98
- 50Hz/60Hz frequency converter mode
- Programmable power outlets
- Emergency power off function (EPO)
- Optional Eco-mode operation for energy saving
- Generator compatible
- Backup time for all models is easily extended by simply plugging additional battery banks
- Battery banks are available with internal charger to enable fast recharge even with large battery banks
- USB, RS232, SNMP and AS400 multiple communications available
- Extendable maintenance bypass available for all models
Specifications
CENTURION TOWER |
||||||||
| Capacity | 1000VA / 800W |
2000VA / 1600W |
3000 VA / 2400W |
6000VA / 4800W |
10000VA / 8000W |
|||
| Model | PSCE1000 | PSCE2000 | PSCE3000 | PSCE6000 | PSCE10K | |||
| Topology | True online double-conversion | |||||||
INPUT |
||||||||
| Voltage | Low Line Transfer | 160 VAC / 140 VAC / 120 VAC / 110 VAC ± 5% (based on load percentage 100% - 80% / 80% - 70% / 70 - 60% / 60% - 0) |
176 VAC @ 100% load 110 VAC @ 50% load |
|||||
| Low Line Comeback | 175 VAC ± 5% | 186 VAC @ 100% load 120 VAC @ 50% load |
||||||
| High Line Transfer | 300 VAC ± 5% | 300 VAC | ||||||
| High Line Comeback | 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz | 290 VAC | ||||||
| Range Frequency | 47.5Hz ~ 52.5 Hz or 57Hz ~ 63Hz | 46~54 Hz 50Hz / 56~64Hz 60Hz | ||||||
| Phase | Single phase with ground | |||||||
| Power Factor | 0.98 | 0.99 @ 100% load | ||||||
OUTPUT |
||||||||
| AC Voltage Regulation (Batt. Mode) | ± 3% | ± 1% | ||||||
| Frequency Range (Synchronized Range) | 48 ~ 52Hz or 57 ~ 63Hz | 46~54Hz 50Hz / 56~64Hz 60Hz | ||||||
| Frequency Range (Batt. Mode) | 50Hz ± 0.25Hz or 60Hz ± 0.3Hz | 50Hz ± 0.1Hz or 60Hz ± 0.1Hz | ||||||
| Load Crest Factor | 3:1 | |||||||
| Harmonic Distortion | 3% THD (Linear Load) 6% THD (Non-Linear Load) |
4% THD (Linear Load) |
2% THD (Linear Load) |
|||||
| Transfer | AC Mode to Batt. Mode | zero | ||||||
| Inverter to Bypass | 4 ms (Typical) | zero | ||||||
| Waveform (Batt. Mode) | Pure Sinewave | |||||||
EFFICIENCY |
||||||||
| ECO Mode | 85% | 88% | 90% | |||||
| Battery Mode | 83% | 88% | ||||||
BATTERY |
||||||||
| Battery Type | 12V*9AH (x3) | 12V*9AH (x6) | 12V*9AH (x20) | |||||
| Typical Recharge Time | 4 hours recover to 90% capacity | 7 hours recover to 90% capacity | ||||||
| Charging Current (max.) | 1.0A | 1.0A | ||||||
| Charging Voltage | 41.0 VDC ± 1% | 82.1 VDC ±1% | 273.0 VDC | |||||
PROTECTION |
||||||||
| Full Protection | Overload, discharge, thermal, short circuit and overcharge protection | |||||||
COMMUNICATIONS & MANAGEMENT |
||||||||
| Interface | USB or RS232 as standard, Intelligent slot for PSSNMP or PSAS400 dry contact | |||||||
| Software | Power Shield NetGuard Software - supports Windows based operating Systems, Linux, Unix & Mac | |||||||
| LCD Display/ Alarm | UPS Status, Load Level, Battery Level, Input/Output Voltage, Battery Time Remaining and Fault Indicators | |||||||
| Audible Alarm | Battery Mode, Low Battery, Overload, Fault | |||||||
PHYSICAL |
||||||||
| Dimension (D x W x H) mm | 396 x 145 x 240 | 425 x 190 x 335 | 575 x 250 x 576.5 | |||||
| Weight | 14kg | 26kg | 28kg | 90kg | 35kg | 93kg | 38kg | |
OPERATING ENVIRONMENT |
||||||||
| Temperature | 0- 40°C | |||||||
| Humidity | 20-90% (RH Non-condensing) | |||||||
| Noise Level | Less than 45dBA @ 1 Meter | Less than 55dB @ 1 Meter | ||||||
COMPLIANCE |
||||||||
| Safety | EN62040-1-1 2003, IEC60950-1-1 | |||||||
| EMS | EN62040-2 2006 | |||||||
| RoHS | Directive 2001 / 65 / EU | |||||||
* Specifications are subject to change without notice.
Optional Accessories
